illinois_alum
05-27 09:35 PM
See answers in Blue below
Can you please help, if there are some instructions handy. I am having difficulty for following fields
1. Manner of Last Entry : I think it should be PAR:PAROLEE YES. I USED SAME FOR MY WIFE
2. Current Immigration Status : Again think should be PAR:PAROLEE YES
3. There is a field where it asks for previous EAD's. I am not sure of the date when i applied last time, what date i should put, the date from which EAD is valid ?
I take this has to be the date of application. We didn't remember the exact application date for one of the EADs - we entered an approximate Date
4. Also i have applied for EAD twice, do we need to put the information for both of them. The information is not required...but its better to enter it
5. Other Names/Aliases : I think it should be 'None' in my case as i never had any other name, am i right or should it be left blank.
6. for Eligibility status i think the value should be : (c)(9) FILED I-485 YES
I am in EB2, pririty date Aug 2006. last entry to US Jan 2010 using Advance Parole.
Thanks and appreciate your help.
Can you please help, if there are some instructions handy. I am having difficulty for following fields
1. Manner of Last Entry : I think it should be PAR:PAROLEE YES. I USED SAME FOR MY WIFE
2. Current Immigration Status : Again think should be PAR:PAROLEE YES
3. There is a field where it asks for previous EAD's. I am not sure of the date when i applied last time, what date i should put, the date from which EAD is valid ?
I take this has to be the date of application. We didn't remember the exact application date for one of the EADs - we entered an approximate Date
4. Also i have applied for EAD twice, do we need to put the information for both of them. The information is not required...but its better to enter it
5. Other Names/Aliases : I think it should be 'None' in my case as i never had any other name, am i right or should it be left blank.
6. for Eligibility status i think the value should be : (c)(9) FILED I-485 YES
I am in EB2, pririty date Aug 2006. last entry to US Jan 2010 using Advance Parole.
Thanks and appreciate your help.
wallpaper +cool+smileys+on+facebook
coopheal
12-04 08:58 AM
Bump
daishwarya
07-20 03:03 PM
@Sanjay, sent you a private message. Please check.
2011 roman symbols facebook
hopeful08
04-21 02:19 PM
I wanted to inform the community that our GC is finally approved... I just checked my email hoping against hope that I might see some good news and good news is what I saw...
This is a tremendous relief to us.
They have approved and ordered card production to myself and my spouse. But looks like they have not approved our son's GC. Hope they don't delay that last piece of processing any longer.
Good luck to everybody else and hope you all the best.
Isn't this everyody's concern ? GC process is something that has absolutely no predictability. It's all luck...I've been waiting for that moment from almost 8 years postponing many important decisions in life. So, I've come to the realization that the only thing we can do is hope.
This is a tremendous relief to us.
They have approved and ordered card production to myself and my spouse. But looks like they have not approved our son's GC. Hope they don't delay that last piece of processing any longer.
Good luck to everybody else and hope you all the best.
Isn't this everyody's concern ? GC process is something that has absolutely no predictability. It's all luck...I've been waiting for that moment from almost 8 years postponing many important decisions in life. So, I've come to the realization that the only thing we can do is hope.
more...
venky80
06-16 06:44 PM
That is pretty cool, I hope other people who are in my scenario respond here, so that we can explore specific strategies, coz regardless of your masters in any degree you so learn sophisticated skills to handle specialized jobs.
I definitely believe my masters gave me those skills.
I definitely believe my masters gave me those skills.
gparr
March 15th, 2004, 11:10 AM
Steven brings up a good point about those camera phones. I fear them to a degree. Someone told me recently that they had read/heard advice that when you're using a credit card at a store make sure you keep the numbers covered up. Apparently, people with camera phones have been known to take a picture of your card to get the numbers and expiration date.
Gary
Gary
more...
chanduv23
02-18 09:25 AM
http://www.littleindia.com/news/156/ARTICLE/2040/2008-02-04.html
I was quite disappointed to see so much space devoted Senator Barack Obama in "Power Politics" (January 2008). In particular, I was upset at the "feel good" nonsense spouted, like Bushisms, by one supporter: "I have looked him straight in the eye and I can tell you first hand that the man believes in what he says."
My daughter, a Democrat activist at Georgetown University also had a first hand experience with Sen. Obama when he gave a speech there last year. After the speech he was approached by my Indian daughter and an Anglo-Saxon friend for a handshake, a few words and a photo op. Sen. Obama was brusque, rude and stated that he was too busy for a picture with them. A few steps later he was stopped by an African American woman, who made the identical request. Without hesitation he spoke to her for a few minutes and posed for a photograph, all within feet of my daughter and her friend.
I have tried to contact the senator's staff by phone and e-mail to communicate the disappointment of the two young girls, but have had no response.
My daughter and I will certainly vote for the person his staff tried to insult as the "Senator from Punjab," Sen. Hillary Clinton, and pray that in the final analysis others, young and old, will value the experience and proven loyalty to Indians of the Clintons. I hope I won't be forced to make a choice between Sen. Obama and Sen. John McCain.
Jan Vyas, Via eMail
I was quite disappointed to see so much space devoted Senator Barack Obama in "Power Politics" (January 2008). In particular, I was upset at the "feel good" nonsense spouted, like Bushisms, by one supporter: "I have looked him straight in the eye and I can tell you first hand that the man believes in what he says."
My daughter, a Democrat activist at Georgetown University also had a first hand experience with Sen. Obama when he gave a speech there last year. After the speech he was approached by my Indian daughter and an Anglo-Saxon friend for a handshake, a few words and a photo op. Sen. Obama was brusque, rude and stated that he was too busy for a picture with them. A few steps later he was stopped by an African American woman, who made the identical request. Without hesitation he spoke to her for a few minutes and posed for a photograph, all within feet of my daughter and her friend.
I have tried to contact the senator's staff by phone and e-mail to communicate the disappointment of the two young girls, but have had no response.
My daughter and I will certainly vote for the person his staff tried to insult as the "Senator from Punjab," Sen. Hillary Clinton, and pray that in the final analysis others, young and old, will value the experience and proven loyalty to Indians of the Clintons. I hope I won't be forced to make a choice between Sen. Obama and Sen. John McCain.
Jan Vyas, Via eMail
2010 tattoo facebook smileys and
Nikith77
10-05 03:32 PM
I did that today and they also call the same number from there.
The caller clearly told me that Citizens or CG only
The caller clearly told me that Citizens or CG only
more...
mmanurker
04-13 11:48 AM
I am not 100% sure but when you are on H1B should'nt you be working from where your LCA was approved for? In OP's case, its remote work but outside USA, in that case I am not sure
1. if the LCA filed will any longer be valid and that might cause issues with labor dept
2. what happens when USCIS finds out that you left the country and physically not present in USA and still running payroll in USA plus also the LCA is no longer valid, this might be an issue when your renewal comes up.
3.how your payroll can be run when you are not in the country?what are the tax implications? you need to have a physical address in US to file taxes, is'nt it? without an address in the specified location and specific state, you will be considered as non-resident.
when you file taxes as non-resident but a resident of a different country, then you will have to understand the tax treaties between the USA and the resident country and file taxes accordingly.
You might want to talk to an immigration attorney as well as someone who specializes in taxes(not just CPA, but an attorney who understands tax laws). I dont think this can be as simple as others mentioned. this is just my opinion and I could be wrong. talk to legal experts.
1. if the LCA filed will any longer be valid and that might cause issues with labor dept
2. what happens when USCIS finds out that you left the country and physically not present in USA and still running payroll in USA plus also the LCA is no longer valid, this might be an issue when your renewal comes up.
3.how your payroll can be run when you are not in the country?what are the tax implications? you need to have a physical address in US to file taxes, is'nt it? without an address in the specified location and specific state, you will be considered as non-resident.
when you file taxes as non-resident but a resident of a different country, then you will have to understand the tax treaties between the USA and the resident country and file taxes accordingly.
You might want to talk to an immigration attorney as well as someone who specializes in taxes(not just CPA, but an attorney who understands tax laws). I dont think this can be as simple as others mentioned. this is just my opinion and I could be wrong. talk to legal experts.
hair Facebook Symbols - Emoticons
franklin
07-13 04:23 PM
BEst of luck to you all for the rally. Take lots of photos. Who is arranging video cameras,digital cameras from IV.
NJ member
There are multiple people bringing cameras and camcorders :)
NJ member
There are multiple people bringing cameras and camcorders :)
more...
dontcareanymore
11-12 05:54 PM
Go for it! She can volunteer (obviously, she cannot get paid for the work she will do). I think it is a great idea to volunteer to establish connections and gain work experience to get ready for a real job.
My wife did the same thing when she was on H-4 and HR had no issues with that.
Cheers!
If you see the regulations, you can't work for free on H4 if that work is generally done for money.
As some one stated, if you can't work on some thing that appears to have replaced an eligible worker.
Say for example you can't run a friends consulting company and say I am not being paid. Or teach in a for profit organization. You can however do some community work.
Some people might have gotten away by doing so , but I don't think that makes it legal or right.
My wife did the same thing when she was on H-4 and HR had no issues with that.
Cheers!
If you see the regulations, you can't work for free on H4 if that work is generally done for money.
As some one stated, if you can't work on some thing that appears to have replaced an eligible worker.
Say for example you can't run a friends consulting company and say I am not being paid. Or teach in a for profit organization. You can however do some community work.
Some people might have gotten away by doing so , but I don't think that makes it legal or right.
hot provides facebook Smileys
zCool
12-14 11:43 AM
Go to Canada or India and have a vacation. You have a real job right?
Shouldn't be hard to get Visa stamped and then come back.
Shouldn't be hard to get Visa stamped and then come back.
more...
house how to make facebook emoticons on chat. new cool facebook emoticons
bbenhill
09-18 05:26 PM
Of course you can work using your EAD for your Employer. The reason why so many still remain on H1(even after getting EAD) is because if the I-485 (AOS) is denied, they can still continue to work on H1 and maybe restart the whole GC process. But its not possible once you switch to EAD. You cannot fall back to H1.
LostInGCProcess, his I140 is not approve, how come he can use his EAD ?
AOS can only be use after his I140 is approved.
Thx
LostInGCProcess, his I140 is not approve, how come he can use his EAD ?
AOS can only be use after his I140 is approved.
Thx
tattoo smiley Nyahheart symbol of
pt326bc
09-27 10:36 AM
Same issue with me.
Different A# on I 140 and the I 485 receipt notice. The A# on the FP notice is the same as the I 485 receipt notice.
I have emailed the paralegal handling my case and she said she'll confirm with the lawyer and get back to me.
BTW my I 140 A# starts with 088 and the I 485 receipt notice starts with 094.
Don't know what that means.
Will keep you guys updated with whatever my lawyer sends me back.
Regards.
Different A# on I 140 and the I 485 receipt notice. The A# on the FP notice is the same as the I 485 receipt notice.
I have emailed the paralegal handling my case and she said she'll confirm with the lawyer and get back to me.
BTW my I 140 A# starts with 088 and the I 485 receipt notice starts with 094.
Don't know what that means.
Will keep you guys updated with whatever my lawyer sends me back.
Regards.
more...
pictures Smiley+symbols+on+facebook
viva
01-31 11:13 PM
he is extremely knowledgable person in terms of immigration, he has 5000+ posts on immigration forums and has helped countless people with immigration issues. His name seems to be Nadeem and is a Canadian immigrant and is a CPA and his EB3 petition is in retrogression.
In recent times he started stereotyping immigrants and make every immigrant feel that they are breaking laws in some way or the other and became unpopular.
He was not in support of IV and was under a strong feeling that a bunch of immigrants are wasting precious time and money. But now he seems to change his stance and has stepped into IV and has become a member. He is very helpful in terms of his skills and willingness to share his knowledge and help people.
He does audit to a lot of h1b dependent employers and has direct influence and can strongly recommend them to contribute for this cause. Most of his analysis about patterns of visa distribution comee out as expected but in recent times there were instances where his analysis went wrong too.
Overall he is definitely of great help if he wishes to dedicate some time of his to this cause and help in all ways possible.
if he was a cfo or is a cfo, as he claims on previous posts, why is he filinf under eb-3? why can't he file under eb-2 or eb-1? isn't eb-1 for multinational executives?
most cfos would be toiling inside their companies, rather than spending time on forums. may be, he is just getting to act out his dream of being a cfo on the forums. may be, he thinks he can get away with claiming to be anything. after all, who is going to check? i could say i am the ceo of citibank or intel or microsoft. who is going to check on that? i can post a link to the sec website where my name will be shown as steve balmer.
people can claim to be a lot of things in this world..just don't believe everything they say without proof....
if i said that i am a talking elephant, would you believe me? probably, no. so, why would u believe that united nations is what he says he is?
In recent times he started stereotyping immigrants and make every immigrant feel that they are breaking laws in some way or the other and became unpopular.
He was not in support of IV and was under a strong feeling that a bunch of immigrants are wasting precious time and money. But now he seems to change his stance and has stepped into IV and has become a member. He is very helpful in terms of his skills and willingness to share his knowledge and help people.
He does audit to a lot of h1b dependent employers and has direct influence and can strongly recommend them to contribute for this cause. Most of his analysis about patterns of visa distribution comee out as expected but in recent times there were instances where his analysis went wrong too.
Overall he is definitely of great help if he wishes to dedicate some time of his to this cause and help in all ways possible.
if he was a cfo or is a cfo, as he claims on previous posts, why is he filinf under eb-3? why can't he file under eb-2 or eb-1? isn't eb-1 for multinational executives?
most cfos would be toiling inside their companies, rather than spending time on forums. may be, he is just getting to act out his dream of being a cfo on the forums. may be, he thinks he can get away with claiming to be anything. after all, who is going to check? i could say i am the ceo of citibank or intel or microsoft. who is going to check on that? i can post a link to the sec website where my name will be shown as steve balmer.
people can claim to be a lot of things in this world..just don't believe everything they say without proof....
if i said that i am a talking elephant, would you believe me? probably, no. so, why would u believe that united nations is what he says he is?
dresses smiley face symbols for
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
more...
makeup gmail emoticons
pappu
10-18 10:16 AM
I received a letter from BEC and it says
This Notice of Findings is the Department’s statement of its intent to deny the application.
The following reasons were attached in the document:
1. - The job opportunity has been and is clearly open to any qualified U.S worker.
The case file indicates that telephone calls were placed made to U.S. applicants but the calls failed to reach the following applicants: A,B,C (name of the applicants)
Although telephone calls were unsuccessfully places to the three U.S. applicants, no certified mailing or other attempts were made to contact the applicants. An employer must prove that its overall recruitment efforts were in good faith.
The employer may rebut this finding by:
Providing documentation that certified mail was sent to the four applicants which demonstrates the employer made the minimally acceptable effort to recruit U.S. applicants.
2. The department of labor requires that when submitting an Application for Alien Employment Certification the case file must contain two sets of original ETA 750’s Parts A and B. your case file contains only one set of original ETA750’s. The other set of 750’s in the case file are photocopies. ETA 750’s with photocopied signatures are not acceptable for processing. In order to continue processing the Application for Alien Employment Certification you must send an additional set of original ETA 750’s.
A copy of the Form ETA 750, parts A and B, have been returned in the event that any changes are necessary. The amended copies must be returned with your resubmission. Any amendments made to the ETA 750, Part A, must be initialed and dated by the employer: and any amendments made to the ETA 750, Part B, must be initialed by the alien, as appropriate.
It is the employer’s responsibility to submit the rebuttal in a timely manner directly to the certifying officer.
I got already my 7th year extension and it valid till Nov 2007. I spoke with my attorney and he seems to be positive, but he could only able to find two of the three candidates email correspondence.
Please let me know if you have faced similar situation or any suggestions. What is the possibility of my case gets approved?
sorry to hear this. There are several instances where employers have been callous or did not take adequate interest in filing the application. My experience with lawyers is also the same, especially if the lawyer is hired by the company. I would suggest members who are yet to hire an attorney to hire their own attorney instead of going with the company attorney. a company attorney will only work in the interest of the company. if you dont have a choice in this matter, then also hire your own attorney as a consultant and run each and every document by him before it is submitted to the authorities. It will keep you safe from such irregularities. Some extra money spent on having your own lawyer as a consultant is always helpful.
In your case i recommended seeking advice from multiple lawyers. submit your question to our attorney- sonal verma for the confrence call. legal advice for IV members is free in these conference calls. In future try to be on top of things wth HR with your application and be aware of all documents and proccedures instead of depending on HR and lawyers. I am sure there must be a way your situation can be sorted out. good luck.
This Notice of Findings is the Department’s statement of its intent to deny the application.
The following reasons were attached in the document:
1. - The job opportunity has been and is clearly open to any qualified U.S worker.
The case file indicates that telephone calls were placed made to U.S. applicants but the calls failed to reach the following applicants: A,B,C (name of the applicants)
Although telephone calls were unsuccessfully places to the three U.S. applicants, no certified mailing or other attempts were made to contact the applicants. An employer must prove that its overall recruitment efforts were in good faith.
The employer may rebut this finding by:
Providing documentation that certified mail was sent to the four applicants which demonstrates the employer made the minimally acceptable effort to recruit U.S. applicants.
2. The department of labor requires that when submitting an Application for Alien Employment Certification the case file must contain two sets of original ETA 750’s Parts A and B. your case file contains only one set of original ETA750’s. The other set of 750’s in the case file are photocopies. ETA 750’s with photocopied signatures are not acceptable for processing. In order to continue processing the Application for Alien Employment Certification you must send an additional set of original ETA 750’s.
A copy of the Form ETA 750, parts A and B, have been returned in the event that any changes are necessary. The amended copies must be returned with your resubmission. Any amendments made to the ETA 750, Part A, must be initialed and dated by the employer: and any amendments made to the ETA 750, Part B, must be initialed by the alien, as appropriate.
It is the employer’s responsibility to submit the rebuttal in a timely manner directly to the certifying officer.
I got already my 7th year extension and it valid till Nov 2007. I spoke with my attorney and he seems to be positive, but he could only able to find two of the three candidates email correspondence.
Please let me know if you have faced similar situation or any suggestions. What is the possibility of my case gets approved?
sorry to hear this. There are several instances where employers have been callous or did not take adequate interest in filing the application. My experience with lawyers is also the same, especially if the lawyer is hired by the company. I would suggest members who are yet to hire an attorney to hire their own attorney instead of going with the company attorney. a company attorney will only work in the interest of the company. if you dont have a choice in this matter, then also hire your own attorney as a consultant and run each and every document by him before it is submitted to the authorities. It will keep you safe from such irregularities. Some extra money spent on having your own lawyer as a consultant is always helpful.
In your case i recommended seeking advice from multiple lawyers. submit your question to our attorney- sonal verma for the confrence call. legal advice for IV members is free in these conference calls. In future try to be on top of things wth HR with your application and be aware of all documents and proccedures instead of depending on HR and lawyers. I am sure there must be a way your situation can be sorted out. good luck.
girlfriend facebook emoticons symbols
ajcates
03-08 12:06 AM
I use notepad, so I think we should have a notepad forum.
hairstyles facebook emoticons pictures.
ndbhatt
04-22 10:54 PM
About 25,000 PERM labors were approved in 2007 for Indian nationals. Assuming a 2.5:1 ratio of 'GC filed:Labor approved', implies that each year 62,500 GC are demanded by Indians under EB. Since only 10,000 are available (across all EB classes), this implies each year a backlog of 50,000 cases is created for Indians.
Since PD are essentially retrogressed from Nov. 2005, we can assume that since then another 100,000 Indians have joined the GC backlog. It can also be assumed that between 2001 and Nov. 2005 there must be another (atleast) 50,000 waiting for GC.
Assuming these numbers are correct, a person filing for labor today is looking to wait for atleast 15 years before getting a GC (150,000/10,000).
As for those wth PD prior to Nov. 2005 - well..... probably anywhere between 1 to 5 years .....
Comments on the analysis.........?
I am not sure what percentage of these are PERMs, filed for same person. Atleast, I for one can speak for myself. My PERM was filed last year but now since I changed my employer after that, everything is reset.
Since PD are essentially retrogressed from Nov. 2005, we can assume that since then another 100,000 Indians have joined the GC backlog. It can also be assumed that between 2001 and Nov. 2005 there must be another (atleast) 50,000 waiting for GC.
Assuming these numbers are correct, a person filing for labor today is looking to wait for atleast 15 years before getting a GC (150,000/10,000).
As for those wth PD prior to Nov. 2005 - well..... probably anywhere between 1 to 5 years .....
Comments on the analysis.........?
I am not sure what percentage of these are PERMs, filed for same person. Atleast, I for one can speak for myself. My PERM was filed last year but now since I changed my employer after that, everything is reset.
viper673
06-08 01:27 PM
I did think about doing it this way, but it didn't feel the "right thing to do"...
I spoke to my lawyer on what to do , but I'm not getting a straight answer.
Do you guys recommend a lawyer that would be able to help?
I checked Murthy.com and she asks for $250/20min of consultation... Is she that good? Should I consider calling her?
I spoke to my lawyer on what to do , but I'm not getting a straight answer.
Do you guys recommend a lawyer that would be able to help?
I checked Murthy.com and she asks for $250/20min of consultation... Is she that good? Should I consider calling her?
ramus
06-14 10:43 AM
Guys,
Don't create new thred for every single question you have.. You can find right thred and put it there..
Yes you can file for 485 even though your H1B extension is pending.
Hi,
My 8th year H1 extension is pending with CIS, and my current H1 expires on June 26, 07. Can I file my 485 when my H1 status is pending from CIS?
Please advise.:confused:
Don't create new thred for every single question you have.. You can find right thred and put it there..
Yes you can file for 485 even though your H1B extension is pending.
Hi,
My 8th year H1 extension is pending with CIS, and my current H1 expires on June 26, 07. Can I file my 485 when my H1 status is pending from CIS?
Please advise.:confused:
No comments:
Post a Comment